My BMW R1150 GSAA at Deals' Gap

Powered by Squarespace

Entries in Jesse Luggage (1)


Ending the Jesse Sag

As you know, my R1150GS Adventure has Jesse Odyssey bags. I also have a Remus replacement muffler that was installed during the BMW MOA Rally in Wisconsin in 2007. One of the problems that's haunted my bike is Jesse "sag" and shifting muffler alignment that's occasionally caused enough movement that the stainless edge of the Remus contacts the powder coated surface of the left Jesse bag.

You can see the paint damage next to the Remus muffler

Earlier this summer, I removed the muffler, aligned it better on both ends and took care to tighten the bottom clamp enough that I believe it no longer shifts. However, on extended trips, I usually have both Jesse bags quite loaded and the design of the left side bag and mounting hardware does allow some sagging which brings the edge of the Remus closer to the aluminum of the bag.

While hanging out in the hotel parking lot during the 2009 BMW MOA Rally in Gray, TN, I spotted another R1150GS Adventure that had a piece of unique, non-electronic farkle added. It was an extra bag support that mounts to the existing Jesse hardware and pushes outward on the the bag - preventing the sag and strengthening the "system" if the bike should fall over on its left side.

I needed to depart the rally early the following day for Wisconsin, so Ed Gray spent some time at the rally looking for the vendor that made the piece. He found them!

They are Excel Cycle and Machine Werkes of Delevan, IL. Tom Dowell (owner) makes some NICE stuff for the BMW riders! Ed was kind enough to pick up one of their R1150GS Jesse Bag Supports for me. They also have them for the R1200GS!

I installed it easily this morning, removing the adjusting nut and two of the three washers for proper alignment with my left-side bag.

Finished! No more sag!